RFQ · info@promechprocessmachinery.com
Tell us what you grind.
Thirteen boxes, eight of which decide the machine. You get a written breakdown back — model, chamber material, bead range, seal grade, motor and voltage, spares, packing and inland freight to Qingdao — each priced as its own line.
Before you send
The eight numbers that make a quote accurate.
01
Solids & viscosity
Percentage solids by weight, and viscosity at your feed temperature. These move the machine size more than anything else.
02
Target fineness
D50 and D90, or a grind-gauge reading. Say which one is the acceptance test.
03
Quantity & pattern
Litres per hour continuous, or litres per batch and batches per day. Both are fine answers.
04
Cooling & climate
Cooling-water temperature and pressure, plus how hot the plant room gets in the afternoon.
05
Supply
Voltage, frequency, phases. And whether the room is classified for solvent.
06
Contamination limit
Any iron or metal limit in your spec, and whether the product is eaten or applied to skin.
07
Destination
Port you take delivery at, and whether you want FOB or a landed price.
08
Deadline
When you need it running. If we cannot meet it, we will tell you in the first reply, not the last.
Don't have those numbers?
Most buyers don't, especially on a first order. Send a short video of the material you run today — its colour, how it falls off the scoop, what it leaves on the side of the drum — plus your drum or IBC size and the voltage you have on site. That is enough for us to give a starting point and the questions genuinely worth asking. Guessing at a solids content you have never measured helps nobody.